FRAMES
PARTS
SOFT GOOD
GOOD DEALSCUD EVO3 "4RK' 3K CARBON
Zoom
Features
NEW PROPHECY SCUD EVO3 CARBON FORK "4RK":
- Size available: 20" & 24" Cruiser.
- For 20mm front axle but deliver with 10mm adaptors + Integrated headset 1-1/8" top bearing & 1/5 bottom bearing 45°/45° + 100mm specific compression bolt + Prophecy aluminium top cap
- 100% one piece carbon fork
- Use only high-modulus carbon from Japan
- 1-1/8" to 1/5 over size carbon steerer
- 180mm steerer tube length
- Aero crown with only 30mm width
- Aero carbon fiber legs
- 20mm drop-out offset
- Crown race free = No need to put a crown race, it is integrated directly in the shape of the fork
- Internal locking system to eliminate expander plugs that often compromise steerer strength
- Compatible with every frame with a head tube oversize 1-1/8" to 1/5 accepting integrated headset 45°/45°
- Same color artwork design than the frame Scud Evo3 Chrome
- Weight: 520gr +/-5% (1,15lbs or 18,34oz).
HIGH LABORATORY TESTS:
We do not want to show to our competitors all details about ours tests but all ours tests are a lot more extremely tough and destructive than any existing ISO tests and than any tests others brands doing on the market.
- Fork bending fatigue : In our test we increase the number of cycles by 50% more than the ISO standard and increase as well the frequency
- Falling mass on hub area: In our test we more than double the high of the drop and nearly double the weight
- Falling mass on steerer : We have developed a specific tool to test our carbon steerer, that nobody do in the BMX industry. Our steerer process is as well unique with a solid carbon steerer and a unique internal locking system to eliminate expander plugs that often compromise steerer strength
- Static bending test: Here again we have increased the force and the applying force time for that test
- Stiffness test: A product not stiff might not break, so this test is to be sure that our product get the stiffness required at the same time than the strength requiered
- Breaking resistance: Here we want to check which level of force is needed to break the fork = To know the breaking point of the fork
