PROPHECY BMX CARBON RIMS

SUPER LIGHT CARBON RIMS 

Our rims are made from 3K & UD carbon TORAY T700

SPECS:

• 20x1.75" 30x30mm, fits tires 1.5" to 2.25", 36 or 32 holes, presta valve : Weight about 299gr (+/-7%)
• 20x1-3/8" 35x23mm, fits tires 1-1/8" to 1-3/8", 28 holes, presta valve : Weight about 299gr (+/-7%)
• 24x1.75" 30x30mm, fits tires 1.5" to 2.25", 36 holes, presta valve : Weight about 380gr (+/-7%)

If you are looking for stiffness and lightness to improve your speed on the track, for sure our carbon rims will help you to lead the pack!

TECHNICAL INFORMATION FOR ASSEMBLING:

• 20x1.75" 30x30mm : ERD = 369mm
• 20x1-3/8" 35x23mm : ERD = 397mm
• 24x1.75" 30x30mm : ERD = 469mm
• Maximum tires pressure = 130 PSI
• Maximum spokes tension = 180Kg

Our braking surface can resist to 250 Degrees Celsius, but we advise to use our specific brake pads that you could find in our website to have a better and safer braking performance.

QUALITY:

Our rims are produced with high quality steel molds by high temperature compression machines (180 degrees Celsius).

We use as well 100% EPS mold inside the rims in order to have a smooth internal surface of the rims and avoid any weak point and save weight.

TEST:

100% of our rims must pass all ours tests before and during the production process.

Before to validate the development of our rims with:

1) Impact test

2) Press test

3) Torque test

4) Spoke tension test

During the production process with:

1) Flatness test

2) Roundness test

3) Appearance test

4) Tire pressure test

5) Spoke hole accurate test

WARNING: RIM WEAR OUT WITH USE. CHECK WEAR STATUS REGULARY AND REPLACE WHEN WORN. A WORN-OUT RIM MAY CAUSE AN ACCIDENT, PERSONAL INJURIES OR DEATH. WE ADVICE TO USE ONLY PROPHECY BMX'S BRAKE PADS SPECIFIC FOR CARBON RIMS AVAILABLE IN OUR WEBSITE.