SCUD EVO2 frame kit sizes available:
6 sizes available: Expert / Expert XL / Pro / ProXL / ProXXL / ProXXXL.
Frame kit include: Frame / Fork / Headset / Seat clamp / Chain tensioners / Front and rear axle adaptors / Head tube adaptors.
So what's new on this frame kit?
OPTIMIZED INTEGRATION SYSTEM :
Designing the frame & fork together as only one global system to save maximum of grams compared to competitors.
100% new mold with a new process of fabrication using UD carbon and 3K final carbon layers on all the frame.
The weight saving on the Scud Evo2 frame is about -17% compare to the Scud Evo frame and about 31% on the new full carbon fork compare our “4RK” with steel steerer.
So it represent a weight saving of about 500gr (1.10 lbs / 17.637oz) on the frame & fork!!! (This calculation is based on ProXL size).
The Scud Evo2 is made of a one piece monocoque front triangle and two pieces rear stays bounded together with the front triangle.
The differences compare the Scud Evo frame are:
Note: Seat post diameter is 25.4mm for Expert and Expert XL and 27.2mm for all over sizes.
The new fork “4RK” is a 100% one piece carbon monocoque fork with specific carbon tapered steerer fitting exclusively our Scud Evo2 frame head tube (Adaptors to assemble other tapered fork and standard 1-1/8" steerer are supplied with the frames).
The fork is very light weight (555gr / 1.22 lbs / 19.577oz) with a "ultra" thick steerer reinforced by using specific fibers coming from USA.
20mm front axle with 10mm front axle adaptor supplied.
All our forks are checked one by one by X-ray to see if there is any internal structural problems that can weaken its resistance...
Rear axle 10 or 20mm: 110mm OLD + one side dropout thickness is 9mm with the chain tensioners so tolal is 128mm.
Front axle 10 or 20mm: 100mm OLD + one side dropout thickness is 6.5mm so total is 113mm
If frame size not available on our website please send us an email to firstname.lastname@example.org